- Max panel width 4400 mm.
- Max panel lenght 44000.
- Main saw blade projection 80 mm
- Motorized pushing carriage with 8 grippers
- N° 4 front support tables
- CE standards

- Working area 3080mm x 1250 mm
- Workable panel thickness 180 mm
- N° 1 Hsk F 63 5-axis electrospindle
- N° 1 Tool store with 15 positions on Y carriage
- N°1 Supplementary tool store with 11 positions
- N° 13 independent vertical spindles
- N° 3 + 3 horizontal boring spindles in X
- N° 2 + 2 horizontal boring spindles in Y
- Integrated blade in X diameter 125 mm
- Flat Table with 4 independent areas
- Software Maestro
- 250 m3/h vacuum pump
- CE standards.

- Maximum workpiece thickness 60 mm
- Edge thickness in rolls max 3 mm
- Top pressure system with rubber belt
- Feed speed max 22 m/min
- Spraying unit (Anti-sticking liquid)
- Pre-milling
- Glue pod unit
- Edge Pressure unit 1 + 4 rollers
- End cutting unit
- Fine trimming unit
- 2 motors round unit
- Edge Scraping Unit
- Glue scraper unit
- Milling unit
- Brush unit
- CE standards

Used CNC Vertical Working Center Biesse Brema EKO 2.2

• Panel length: 200 - 3200 mm;
• Panel width: 35 - 1250 mm;
• Panel thickness: 8 - 60 mm;
• Worktop with counter-pressure system;
• Clamps with thickness measurement system;
• Laser-based reading system for detecting the panel end;
• Compensation of length tolerances through panel dimensions in X;
• Tool changer with 8 positions;
• HSK F63 electrospindle 6.5 kW with C Axis (4 axis);
• 8-position tool change;
• Double drilling units each one complete as follow: - 12 vertical spindle - 3 + 3 horizontal spindle in X - 1+ 1 Horizontal spindle in Y;
• Software: bSolid;
• CE Mark

VIDEO

- Working area 3.050 x 1.455 mm
- Working thickness 250 mm
- N. 1 E/spindle 5 Axis HSK
- 12 position chain tool change
- N. 13 vertical spindles
- N. 2 opposed horizontal spindles in X
- N. 1 opposed horizontal spindle in Y
- N. 8 Shmalz rails
- System to help heavy panels load
- Motorized chip evacuation system
- Vacuum Pump
- CE standards.

• Working area 3220 x 1800
• Flat table 1600 x 1800
• Z passage 300 mm
• Axes stroke X 4300 Y 1800
• 2 E/Spindles da 11 KW a 10.500 rpm HSK 63 F
• 2 10 positions Revolver tool change
• 1 250 mc/h vacuum pump
• 2 BH 19 Drilling units
• Osai Numerical control
• CE Mark

• Electronic touch screen control. Easypro 3000;
• Sanding belt width / development: 2,620 x 1,350 mm;
• Useful working width: 1,350 mm;
• 1st Group: Roller of 250 mm 45 Sh. 20 Hp with inverter;
• 2nd Group: Roller of 340 mm 30 Sh. 20 Hp with inverter;
• 3rd Group: Superfinishing machine with 46-sector 20 Hp pad;
• Oscillating polisher diameter 200 mm 2.2 Hp;
• Rotating blowers for panel cleaning.;
• Oscillating blowers for belt cleaning;
• Double grooved rubberized pressure rollers;
• 3 infeed and outfeed panel support rollers;
• Vacuum hob with 10 Hp electric fan;
• Regulation of depression according to absorption;
• Advancement of the belt with 5.5 Hp inverter 3.5-20 m/min;
• Rear driving roller covered in rubber;
• CE regulations

VIDEO

- Workable panel thickness 10 - 60 mm
- Edge thickness in rolls max 3 mm
- Feed speed 12 m/min
- Lateral support with idle wheels
- Automatic track lubrication
- Premilling unit
- EVA glue unit
- End cutting unit
- Fine trimming unit with controlled axis
- 2 motors round unit with 2 positions
- Edge Scraping Unit
- Glue scraper unit
- Brush unit
- CE mark

• Working dimensions: 4500x4500 mm
• Overhauled blade: 100 mm
• Motorized pushing carriage with 7 grippers
• Carriage with blade and scoring unit
• Fixed front table with additional guide and air blow device
• Loading of the panels row on the lifting table
• 3 Front table with air blow device
• CE Mark.

VIDEO